Metal regiment buttons with a rear shank for fixing. Made from non-ferrous metal with a slightly domed surface and hollow back. The detailed 3D coat of arms design displays a crown above a regiment crest, framed by laurel leaves on each side. With a slim profile and a weight of approximately 5 g each, these buttons offer durability without bulk. Antique Silver finish with a patina to resemble old age.

Available in one size only – 18mm (28L)

The actual color of the button may vary slightly from what you see on your screen. This is due to differences in display settings, monitor calibration, lighting conditions, and graphics hardware. We do our best to ensure accurate color representation in our photos.

These metal regiment buttons are perfect for coats, jackets, blazers, military-inspired costumes, and knitwear. Their classic design also makes them suitable for a wide range of sewing, knitting, and craft projects.

See our full range of silver military buttons

Helpful Tips

To determine the correct button size, measure the largest outer diameter from one edge to the other. For domed buttons, it is often easier to measure across the flat back for a more accurate reading.

Standard button sizes. If you’re creating a classic garment, there may be a standard size for the buttons you include. For instance, the average button size for a man’s shirt will have 13L (8mm) buttons on the collar, 16L (10mm) on the cuffs and 16L (10mm) to 20L (12.5mm) on the button placket. Men’s suits usually have a 24L (15mm) button on the jacket cuff and trouser and 32L (20mm) buttons to fasten the jacket.

Buttonhole size. As a general rule, buttonholes should be 3mm bigger than the button diameter.

Tutorial. Sewing buttons is very easy once you get the hang of it. It’s a very useful skill to possess, as buttons do fall off. This is a useful tutorial which shows how to sew a shank button