No-sew jeans buttons designed for quick and secure fixing through fabric. Features a metal button front with an antique brass finish, covering a sturdy plastic shank/post. Includes a pin/tack back for easy installation — no sewing required.

Available in one size only – Diameter 17mm (27L)

How to Use: Insert your jeans tack towards the inner side of a pre-punched hole; adjust & place snap shank button onto tack from the upper side and hammer the button with the help of hammer or mallet.  If you’re uncomfortable holding the button with your fingers while you hammer, you can use a pair of pliers to hold the button in place.

The actual color of the button may vary slightly from what you see on your screen. This is due to differences in display settings, monitor calibration, lighting conditions, and graphics hardware. We do our best to ensure accurate color representation in our photos.

These no sew jeans buttons are perfect for replacing or upgrading jeans, denim jackets, dungarees, workwear, and other heavy fabrics.

We sell a variety of no sew jean buttons

Helpful Tips

To determine the correct button size, measure the largest outer diameter from one edge to the other. For domed buttons, it is often easier to measure across the flat back for a more accurate reading.

Standard button sizes. If you’re creating a classic garment, there may be a standard size for the buttons you include. For instance, the average button size for a man’s shirt will have 13L (8mm) buttons on the collar, 16L (10mm) on the cuffs and 16L (10mm) to 20L (12.5mm) on the button placket. Men’s suits usually have a 24L (15mm) button on the jacket cuff and trouser and 32L (20mm) buttons to fasten the jacket.

Buttonhole size. As a general rule, buttonholes should be 3mm bigger than the button diameter.

Tutorial. Sewing buttons is very easy once you get the hang of it. It’s a very useful skill to possess, as buttons do fall off. This is a useful tutorial which shows how to install a jean tack button